RPC Raised Panel Label (RPC)

    Adhesive Backed Panel Labels (no foam layer)

    RPC (Raised Panel) Labels are innovative labels specifically designed to replace engraved and plotted plates for the identification of electrical components, electrical cabinets, push button, patch panels, etc. RPC labels save time and money by allowing you to print name plates exactly when you want them rather than having to order pre-printed name plates and holding stock. This process is a least 7 to 10 times faster than engraving and delivers up to 50 percent cost reduction. RPC labels differ from the RPL labels due to the absence of the foam layer, allowing low profile asset or instruction marking in space restricted areas. RPC labels also benefit from Low Fire Hazard adhesive layer.

    Main Attributes

      Further properties

      • Good resistance; scratching, smearing and rubbing
      • Excellent UV resistance on printed image
      • High tack adhesive, suitable for uneven surfaces
      • Easier and faster than engraved metal plates
      • White, Yellow, Silver - Other colours on request
      • Good resistance against alcohols and diesel oils
      • Glossy topcoat for a smart and professional look
      • RoHS Compliant

      Industry Standards:

        Additional Informatiom

        Printer and Ribbon Recommended: -

        Single Sided SumiTag Printer STP-SQX-300-S-NC-S

        Single Sided SumiTag Printer STP-EOS1-300-S-NC-S

        Single Sided SumiTag Printer STP-EOS4-300-S-NC-S

        Recommended Ribbon: -

        800 Series (super premium) 510 Series (premium)

        Recommended Application Temperature 18 to 35 °C

        Operating Temp. Polyester Film -40°C to 150°C



        High Service Temperature1000 hours at 100°C (212°F) No visual effect
        Low Service Temperature1000 hours at -20°C (-20°F) No visual effect
        Humidity Resistance1000 hours at 37°C (100°F), 95% R.H. PASS
        UV Light Resistance1000 hours in UV light chamber No visual effect
        Weatherability1000 hours in QUV (ASTM G-53) No visual effect
        Abrasion ResistanceTaber Abrasion Tester CS10+500g load - 180 cycles
        Peel Strength at room temperature20 minutes dwell, 35 N/100 mm (32 oz/inch)
        - Stainless Steel20 minutes dwell, 96 N/100mm (87,5 oz/inch)
        - Smooth ABS20 minutes dwell, 120 N/100mm (109 oz/inch)
        - Powdercoated surface20 minutes dwell, 142 N/100mm ( 130 oz/inch)

        Size of Label


        Markers per Roll


        Recommended Ribbon

        Order Code

        27mm x 8mmY-W-S 500Roll510 SeriesRPC270-080**-S
        27mm x 12.5mmY-W-S 500Roll510 SeriesRPC270-125**-S
        35mm x 19mm *Y-W-S 500Roll510 SeriesRPC350-190**-S
        45mm x 15mmY-W-S 500Roll510 SeriesRPC450-150**-S
        60mm x 30mm *Y-W-S 500Roll510 SeriesRPC600-300**-S
        69mm x 19mmY-W-S 500Roll510 SeriesRPC690-190**-S
        90mm x 45mm * Y-W-S 500Roll510 SeriesRPC900-450**-S
        100mm x 30mm * Y-W-S 500Roll510 SeriesRPC1000-300**-S
        100mm x 50mm Y-W-S 500Roll510 SeriesRPC1000-500**-S
        * Non-standard * MOQ applies Custom parts available
        • SEI Identification Solutions Ltd - Pysons Road Industrial Estate, Broadstairs, Kent, CT10 2LQ UK
        • T: +44 (0) 1843 865241
        • F: +44 (0) 1843 867180
        • info@sei-id.com
        For High Performance Cable Identification
        and protection systems since 1934

        © 2015 SEI Identification Solutions | Powered by SeaPublish